Operation Steps And Precautions Of Packaging Machine

As packaging machinery is more and more widely used in the industry, the operation steps and precautions of packaging machines have received attention.
Operation steps and precautions of packaging machine:

1. Place packaging machine materials

First of all, we need to prepare the materials of the packaging machine, such as your product, your packaging container, the material of the product, etc., and put them in the corresponding position for the normal use of the packaging machine.
Precautions:
It should be noted here that, before using the packaging machine, it is necessary to ensure the cleanliness of the packaging machine, especially the packaging machine with filling technology, which is easy to hide dirt and dirt, causing secondary pollution of the product. In addition, the packaging container should be suitable for the size of the packaging machine.

2. Turn on the power switch of the packaging machine

After we have prepared the materials and containers used by the packaging machine, then turn on the power switch of the packaging machine, and the packaging machine is officially started.
Precautions:
It should be noted here that before turning on the power switch of the packaging machine, it is necessary to check its power supply line. If the power cord is exposed, it needs to be replaced in time, otherwise it will easily cause the risk of leakage, and at the same time, it is also very easy to damage the packaging machine equipment. .

3. Packaging machine parameter setting

After the power supply of the packaging machine is turned on, the touch screen of the packaging machine will also start. We need to click to enter the parameter setting of the packaging machine, and set parameters such as temperature, sealing time, sealing speed, and filling capacity value according to the packaging machine’s manual. Ensure the normal use of the packaging machine.
Precautions:
It should be noted here that the parameters of the packaging machine must be set according to the instructions of the packaging machine. For example, the sealing temperature of the packaging machine is 200 degrees. If the set temperature is lower than 200 degrees or higher than 200 degrees, there will be a Air bubbles, or the phenomenon of improper sealing film.

4. The packaging machine starts

After everything is ready, the packaging machine can be officially started, directly press “Start” on the main menu, and the packaging machine can run normally!
Precautions:
During the start-up process of the packaging machine, we must observe the temperature of the machine at any time. If the temperature is too high, we should stop the operation and wait for the packaging machine to cool down for half an hour before starting the operation, so as to avoid the failure of the packaging machine equipment caused by the high temperature. In addition, if the packaging machine has abnormal noise during operation, it should be shut down immediately and restarted after inspection and maintenance.