Correct Operating Procedures For Beverage Filling Machines

1. Check before application. Before starting the application, please ensure that the power plug of the charger is connected to the 380V power supply, and the chassis is grounded to ensure that the air pressure of the beverage filling machine is normal. Check whether the motor and bearing lubrication are required, and it is forbidden to run without oil. Only start the device after normal. At the same time, observe whether there are material chain plates on the conveyor belts of all liquid storage tanks, whether there are foreign objects on the conveyor belts, whether there are bottle caps on the track of the storage cover, whether the water, power and air sources are connected to all liquid storage tanks. All have a material chain plate. Whether there is a foreign object storage cover on the conveyor belt, whether there is a bottle cap, whether the water, power and air sources are connected, and whether each fastener is connected, and whether the operation of each part is guaranteed before normal application. Be stable and be patient.
2. Check whether the safety equipment is in normal operation. Check whether the valve of the reaction tank and the piping of the filter unit are tightly connected, whether the filter cloth of the filter unit is damaged, and whether the cover is covered with fastening bolts to ensure that there is no leakage. Check all connecting lines associated with the beverage filling machine to ensure that there are no broken skins, short circuits and other defects.
3. Before starting the beverage filling machine, check whether there is water in all the water tanks, whether the chain plates are fixed, whether there are sundries on the conveyor belt, whether there are bottle caps in the lid of the storage box, whether there is a water source, and whether the power is connected to the gas source and the gas source. After the source is ready under various conditions, the starting conditions are met when the main power is turned on again, the power indicator is turned on, and the fault indicator and emergency stop indicator are turned off. Press the start button on the control box, then press the start switch at the charging point, the buzzer will sound three times. After the warning, the whole equipment starts to work and enters the fully automatic working mode of washing, rinsing and filling. When the device is stopped, press the stop button on the charging position and on the control box, and disconnect the main power supply after it stops.